Betano app oficial!

Betano app oficial helps you plan which appliances can share a circuit before the watt draw climbs past your budget. Betano each load with its name, watt rating, quantity, and the circuit it sits on. Mark items On draw when they count toward the running total, or Idle when you are only keeping them on the list for later. The home screen shows a budget bar with draw, headroom, and a clear over-budget warning. Betano app oficial! Enter the watts from the appliance plate or label. Use common presets for lamps, heaters, kitchen tools, and shop gear, or type an exact number. Quantity multiplies the draw when you have more than one of the same item on the same circuit. Betano app oficial Assign Kitchen, Living, Garage, or a custom branch name. The home list groups loads by circuit and shows that branch’s active draw so you can plan one circuit at a time or keep a single shared budget for the whole panel. On draw vs idle Only active items add to the running total. Leave a kettle, space heater, or saw Idle until you plan to use it, then flip it On draw and watch the bar. Open any item to toggle status, edit watts, or remove it. Betano app oficial! The Guide is a short offline walkthrough: how to fill the budget and how to read the bar. In Settings, set the circuit budget in watts, choose whether values print as W or watts, load a sample house to see a filled list, or reset everything and start empty. Betano app stores appliance names, watt ratings, quantities, circuit labels, and notes only on this phone. There is no account, no cloud sync, and no ads. The app does not use the internet and does not switch power. It is a notebook for the watt budget you would otherwise keep on paper.