Betano

Betano app keeps a simple checklist for every pipe run on the job. Name the run, set the length, list the fittings, and mark each one done as you install it. Betano app Add a pipe run with a clear name such as Kitchen supply, Bath stack, or Hose bib. Enter the length in metres or feet, the diameter, the material, and the zone of the house. A short note can capture anything the label leaves out. Betano checklist Under each run, list the elbows, tees, valves, reducers, adapters, and caps you still need to seat. Open the run and tap a fitting to flip its done flag. Mark all done when the run is finished, or clear the flags if you need a second pass. Betano organised by zone Runs are grouped by zone so kitchen, bath, laundry, and outdoor work stay easy to scan. Filter the home list by name, zone, material, or fitting when the chart grows. Betano app The Guide is a short offline walkthrough for filling a run and closing the fittings list. In Settings, choose metres or feet, load a sample house to see a filled chart, or reset everything and start empty. Pipefit stores run names, lengths, diameters, materials, zones, fitting checklists, and notes only on this phone. There is no account, no cloud sync, and no ads. The app does not use the internet. It is a notebook for the pipe schedule you would otherwise keep on paper.