Boxsmith is a subwoofer box calculator and speaker box design app that works the way desktop
tools do, on your phone: it simulates how your driver plays in a sealed, ported (bass reflex) or
bandpass box, sizes the port, and draws up the cut sheet. All of that is free: no subscription, no
account, no paywall on the results, and it works offline.
SIMULATION, NOT JUST A VOLUME
- Full Thiele-Small model of the driver and box, the same family of model desktop box-design programs use
- Graphs: response (SPL), maximum SPL, cone excursion against Xmax, port air speed, impedance and
group delay
- Set the amplifier power, a subsonic filter, a low-pass, bass boost and car cabin gain, and see the
effect at once
- Overlay up to four designs to compare them
- Tap or drag any graph to read exact values
THE RIGHT BOX FOR YOUR SUB
- Sealed, ported and 4th-order bandpass boxes
- "Suggest a box" finds flat, deeper-bass and compact designs for your driver with the simulation,
keeping the port buildable
- Warnings in plain words: past Xmax, a port that will chuff, a load too low for the amp, more power
than the drivers are rated for
- Multiple subs in one box, single or dual voice coils, every wiring option with its final load
PORTS DONE PROPERLY
- Slot or round ports, one or several, with the end correction included
- Bass reflex calculator: port length for any tuning; one tap sizes the port to stay under the
air-speed limit
- Tells you when the port needs an L-shaped bend
BUILD IT
- Enter the width and height that fit your trunk or room and fit the depth to the volume
- Wedge (sloped back) boxes for trucks and hatchbacks
- Net volume after the drivers, port and bracing are taken out, checked against the design
- 3D preview with the drivers and port on the baffle
- Cut list in inches and fractions or millimetres, double baffle, port panels
- Sheet layout on 4 × 8 ft or metric sheets with your saw kerf
- Cut sheet as a PDF to take to the shop
YOUR DRIVERS
- Type the T/S parameters from the spec sheet in any common units; Boxsmith works out the rest
(Qts, Mms, Cms, Bl, efficiency, sensitivity, EBP)
- Every value is cross-checked: it warns when Qts disagrees, when Vas looks like cubic feet typed as
litres, or when Xmax looks peak-to-peak
- Share a driver as a file with a friend; import theirs
- Example drivers to try it straight away
TOOLS
- Subwoofer wiring calculator for every combination of subs and voice coils
- Port length and port tuning calculator
- Box volume calculator, including wedges
- Quick sealed box from Fs, Qts and Vas
- Passive crossover values (1st to 4th order, Butterworth and Linkwitz-Riley), L-pad and Zobel
BOXSMITH PRO (OPTIONAL, ONE-TIME)
- Passive radiator boxes: your radiators' Sd, Mms, Fs, Qms and Xmax, the mass to add for the
tuning, and their excursion on the graphs
- 6th-order bandpass: both chambers vented, each with its own tuning and port
- Measured in-car response: import your car's transfer function (text or CSV) and every graph
uses it
- One purchase, no subscription, and it removes ads. Everything else stays free
YOUR DATA STAYS YOURS
- Everything is stored on your phone: no account, no cloud
- Back up every driver and design to one file and restore it on a new phone
Imperial (inches, cubic feet) or metric (cm, litres). The simulation uses the standard lumped model
with 25 °C air; real boxes differ a little, so check your build before you cut.
Subwoofer box calculator, speaker box design, bass reflex calculator, ported box calculator, port
length calculator, sub box builder, car audio enclosure design: Boxsmith, free and ad-supported, from
Fernhart Labs.