Plink0X

See 👀 which spot-up actually evened the impression: Plink0X grades every proof pull zone by zone and credits each change for what it did to the forme. A job starts with a photo 📸 of the lockup and a zone grid laid over it. You choose the rows and columns and mask off the zones that carry nothing. Before each pull you log 📝 the single change you made: a packing sheet added or removed, or a tissue patch placed on a zone and measured with the feeler-gauge caliper slider. Then you photograph the proof and tap 👆 a grade for each zone, from kiss to punch too deep, adding defect chips such as slur or roller ghosting where they apply. In Plink0X the convergence strip draws one line per zone across your pulls, so you can tell whether makeready is settling or going round in circles. The change effect view marks every zone as helped, hurt or unchanged by each change, and shows the pull at which each zone first read even. Spot-up patches sit on the zone map 🗺️ with their caliper totals, so the overlay built up by the last pull reads as a layout instead of a pile of torn tissue. Compare ⚖️ puts any two pulls side by side with a draggable before/after wipe and the grade overlay. The Presses list 📋 averages pulls-to-even per press and per forme type ⌨️, which shows the formes that always need a long makeready. A defect glossary covers punch too deep, kiss, light, slur, roller ghosting, uneven platen and more, each with the usual packing fix and a count of how often you have tagged it. Everything you record stays on your phone 📱, with no account and no connection needed. Close the job once the last zone reads even; Plink0X keeps that final pull and its patch layer as the reference for this forme.