Alkalmazáskeresés

Boxsmith: Subwoofer Box Design

com.fernhartlabs.subwooferboxdesigner
Tools Ingyenes Hirdetéseket tartalmaz Alkalmazáson belüli vásárlások Everyone Megnyitás a Google Playen
50+
telepítés · ≈76
—
0 értékelés
2026-10-29
első megjelenés
2026-11-14
utolsó frissítés

Leírás

Subwoofer box calculator & speaker box design: bass reflex, ports, cut sheet.

Boxsmith is a subwoofer box calculator and speaker box design app that works the way desktop tools do, on your phone: it simulates how your driver plays in a sealed, ported (bass reflex) or bandpass box, sizes the port, and draws up the cut sheet. All of that is free: no subscription, no account, no paywall on the results, and it works offline. SIMULATION, NOT JUST A VOLUME - Full Thiele-Small model of the driver and box, the same family of model desktop box-design programs use - Graphs: response (SPL), maximum SPL, cone excursion against Xmax, port air speed, impedance and group delay - Set the amplifier power, a subsonic filter, a low-pass, bass boost and car cabin gain, and see the effect at once - Overlay up to four designs to compare them - Tap or drag any graph to read exact values THE RIGHT BOX FOR YOUR SUB - Sealed, ported and 4th-order bandpass boxes - "Suggest a box" finds flat, deeper-bass and compact designs for your driver with the simulation, keeping the port buildable - Warnings in plain words: past Xmax, a port that will chuff, a load too low for the amp, more power than the drivers are rated for - Multiple subs in one box, single or dual voice coils, every wiring option with its final load PORTS DONE PROPERLY - Slot or round ports, one or several, with the end correction included - Bass reflex calculator: port length for any tuning; one tap sizes the port to stay under the air-speed limit - Tells you when the port needs an L-shaped bend BUILD IT - Enter the width and height that fit your trunk or room and fit the depth to the volume - Wedge (sloped back) boxes for trucks and hatchbacks - Net volume after the drivers, port and bracing are taken out, checked against the design - 3D preview with the drivers and port on the baffle - Cut list in inches and fractions or millimetres, double baffle, port panels - Sheet layout on 4 × 8 ft or metric sheets with your saw kerf - Cut sheet as a PDF to take to the shop YOUR DRIVERS - Type the T/S parameters from the spec sheet in any common units; Boxsmith works out the rest (Qts, Mms, Cms, Bl, efficiency, sensitivity, EBP) - Every value is cross-checked: it warns when Qts disagrees, when Vas looks like cubic feet typed as litres, or when Xmax looks peak-to-peak - Share a driver as a file with a friend; import theirs - Example drivers to try it straight away TOOLS - Subwoofer wiring calculator for every combination of subs and voice coils - Port length and port tuning calculator - Box volume calculator, including wedges - Quick sealed box from Fs, Qts and Vas - Passive crossover values (1st to 4th order, Butterworth and Linkwitz-Riley), L-pad and Zobel BOXSMITH PRO (OPTIONAL, ONE-TIME) - Passive radiator boxes: your radiators' Sd, Mms, Fs, Qms and Xmax, the mass to add for the tuning, and their excursion on the graphs - 6th-order bandpass: both chambers vented, each with its own tuning and port - Measured in-car response: import your car's transfer function (text or CSV) and every graph uses it - One purchase, no subscription, and it removes ads. Everything else stays free YOUR DATA STAYS YOURS - Everything is stored on your phone: no account, no cloud - Back up every driver and design to one file and restore it on a new phone Imperial (inches, cubic feet) or metric (cm, litres). The simulation uses the standard lumped model with 25 °C air; real boxes differ a little, so check your build before you cut. Subwoofer box calculator, speaker box design, bass reflex calculator, ported box calculator, port length calculator, sub box builder, car audio enclosure design: Boxsmith, free and ad-supported, from Fernhart Labs.

Részletek

Verzió1.1.0
Minimális Android-verzió7.0
Vélemények0
Alkalmazáson belüli árak$2.99 - $6.99 per item
Fejlesztő weboldalafernhartlabs.com
Elérhető ezekben az országokbanvilágszerte (242)
Fejlesztői elérhetőségeka Business csomagban
Az adatok gyűjtve2026-11-15

Ezek az adatok az API-ban

A teljes adatlap JSON-ban 1 tokenbe kerül.

curl -H "X-API-Key: YOUR_KEY" \
  "https://apkapi.com/api/v1/app?id=com.fernhartlabs.subwooferboxdesigner"