Speaker Cleaner: Water Ejector

Muffled sound after water exposure? Speaker Cleaner: Water Ejector generates targeted sonic frequencies and haptic vibration patterns to help dislodge moisture, trapped water droplets, and loose dust particles from smartphone speakers and earpieces. When water enters your phone’s speaker grill, acoustic output drops and audio sounds distorted. This audio utility tool plays calibrated sine-wave tones that physically oscillate the speaker membrane, pushing out liquid and surface debris to help restore clear sound. Core Features Automated Frequency Purge: One-tap auto-eject cycles designed to sweep through high-efficiency liquid displacement frequencies (100 Hz – 300 Hz). Dual Speaker Cleaning: Dedicated sound profiles optimized separately for the bottom main speaker and the front earpiece grill. Manual Frequency Generator: Full control via a responsive tuning slider ranging from 50 Hz up to 3000 Hz for precise manual tone testing. Haptic Vibration Shake: Combines acoustic resonance with mechanical vibration patterns to help loosen stubborn dust and particles. Stereo Sound Diagnostic: Test speaker fidelity with built-in bass, vocal, and treble tone checks to verify clarity after cleaning. Recommended Steps for Best Results Disconnect any connected wired headphones, headsets, or Bluetooth devices. Adjust your device media volume to 100% maximum for effective acoustic displacement. Place the phone facing downward on a dry cloth or paper towel so gravity assists liquid evacuation. Run the auto-eject cycle 2 to 3 times for thorough results. Notice: This app uses low-frequency acoustic sound waves and haptic vibration to clear surface moisture and loose dust. It does not replace physical repairs for blown speakers, torn diaphragms, or hardware-level water damage.