Slabpulse

Slabpulse keeps floor and slab level notes on your phone so you can walk a pour, mark each spot, and see which readings still need work. Map rooms on a slab. Add the spots you check with a straightedge or laser. Record the signed deviation from level and mark each spot open, level, high, or low. Record a room Add each area with the slab it sits on — Ground slab, Garage pour, Basement, or your own label. Give the room a short name such as Kitchen, Hall, or Utility. Keep an optional pulse note for the pour. Spot checklist Under a room, list corners, center, doorway, and wall runs. Enter the reading as a signed number. Positive values are high; negative values are low. Change a spot status as you finish the walk without leaving the detail screen. Keep the pulse current Edit a room when a pour is ground or filled. Remove a room you no longer track. Filter the home list by open, high, low, or level spots, and search by room, slab, or spot name. Guide and settings The Guide is a short offline walkthrough: how to log a slab and how to read the checklist later. In Settings, choose millimetres or inches, load a sample pour to see a filled list, or reset everything and start from an empty pulse. Slabpulse stores room names, slab labels, spot labels, readings, and notes only on this phone. There is no account, no cloud sync, and no ads. The app does not use the internet and does not measure the floor for you. It is a notebook for the level marks you would otherwise keep on paper.