App-Suche

Camera2 API Test & GCam Check

com.probe.camera2
Tools Kostenlos Enthält Werbung Everyone

Diese App ist am 2026-10-26 aus Google Play verschwunden. Unten stehen die zuletzt gespeicherten Daten.

100+
Installationen · ≈453
—
0 Bewertungen
2026-08-19
erste Veröffentlichung
2026-08-19
letzte Aktualisierung

Beschreibung

Probe Camera2 API level, GCam compatibility and RAW — tested, not guessed.

Does your phone support Camera2 API? Will a GCam port work on it? This app answers both on the first screen — then proves the answer by opening a real camera session. Most probes and checkers only read what a device claims. Manufacturers declare capabilities the hardware does not honour, and a Camera2 level forced on through build.prop looks identical to a genuine one. This app measures the difference. A CLEAR ANSWER FIRST The home screen puts the hardware level — LEGACY, LIMITED, FULL or LEVEL_3 — on a ladder, so you see where your device sits, not just a constant name. Under it: a plain-language GCam verdict — supported, degraded, or not supported. GCAM AND GOOGLE CAMERA PORT COMPATIBILITY Nine requirements the HDR+ pipeline depends on, checked one by one on your rear main camera: • Camera2 hardware level, FULL or better • RAW capture and DNG output • RAW_SENSOR present in the stream configuration map • BURST_CAPTURE • MANUAL_SENSOR — manual ISO, shutter speed and focus • Per-frame control, read from SYNC_MAX_LATENCY • YUV and private reprocessing • Logical multi-camera and hidden physical sub-sensors Each gap is explained in words: whether a port merely loses a feature, or cannot take a photo at all. No specific port or version is recommended — those lists go stale, measurements do not. LIVE VERIFICATION: DECLARED VS MEASURED Eight tests open a real capture session and measure what happens: • Session opens, and how long the first frame takes • Per-frame control: does a request apply on frame N+1? • Manual ISO: ask for 100, is 100 read back? • Manual exposure: does 1/500 s hold steady across frames? • RAW and YUV as concurrent streams • Target frame rate in FPS, with dropped frames counted • High-speed video, CONSTRAINED_HIGH_SPEED_VIDEO • 10-bit HLG output Declared, then measured, then verdict. When a device declares a capability the live test cannot confirm — the classic fingerprint of Camera2 switched on by force — the app says so plainly. No preview is shown and no frame is ever saved; only metadata and timing are measured. The camera permission is needed only for this test. FULL CAMERA HARDWARE INFO For every camera the system exposes, front, rear and external: • Sensor: active array, pixel array, physical size, pixel pitch, colour filter arrangement, orientation, timestamp source • Lens: focal length, 35 mm equivalent, aperture, minimum focus distance, optical stabilisation, flash, zoom range • Capabilities: all 21 values in REQUEST_AVAILABLE_CAPABILITIES, marked supported, absent or unmeasurable • Streams: the complete configuration map — YUV_420_888, PRIVATE, JPEG, RAW_SENSOR — with every resolution, aspect ratio, minimum frame duration and the frame rate that follows • Optics: ISO range with the analogue gain limit marked, exposure time in shutter speed and nanoseconds, exposure compensation in EV, noise reduction, edge enhancement and white balance modes • Roles — main, ultra-wide, telephoto, macro, depth — inferred by comparing 35 mm equivalents, since Camera2 never states them • Every raw CameraCharacteristics key, searchable, including undocumented vendor keys, with each value's Java type SNAPSHOT AND COMPARE Save the current state before you change anything: a build.prop edit, a Magisk module, a custom ROM, an OTA. Come back and compare — the app tells you exactly which line changed, and whether it improved or regressed. EXPORT JSON, Markdown and CSV. Reports are always in English so they paste straight into a bug tracker or an XDA thread, and carry no device identity — no serial, IMEI or advertising ID. WHO IT IS FOR Camera app developers, GCam users weighing up a port, anyone probing a new phone before buying, ROM and Magisk users verifying a Camera2 enabler worked. Not affiliated with or endorsed by Google. GCam is referenced only to describe compatibility.

Details

Version1.0
Mindestversion Android9
Rezensionen0
Website des Entwicklersblogspot.com
Entwicklerkontakteim Business-Tarif
Erfasst2026-10-25

Diese Daten in der API

Der vollständige Eintrag als JSON kostet 1 Token.

curl -H "X-API-Key: YOUR_KEY" \
  "https://apkapi.com/api/v1/app?id=com.probe.camera2"